HX-122 Liner less Low Voltage Rubber Tape 80℃ 600V
| application | Rubber Tape |
| carrier | - |
| caliper | 151~200μm |
| construction | Single-side Tape |
| heat_resistance | 80℃ |
HX-122 is self -amalgamating, insulating mastic for insulating and sealing all types of overhead and direct buried electrical connections. It has super adhesion, anti-corrosion. For high voltage cable ends water sealing with continuous operating temperature up to 90℃. It is suitable for insulating protection of cable connection up to 1000V jacketed with vinyl tape. It is suitable for protecting cable joints, tube and cable ends.
Test Result:
| Property | Unit | Value | Test Method |
| Total Thickness | mm | 0.76 | ASTM-D-4325 |
| Tensile Strength | psi | 250 | UL 510 |
| Elongation at break | 400 | % | UL 510 |
| Dielectric Strength | Kv/mm | 20 | UL 510 |
GENERAL PURPOSE INSULATINGTAPE FOR USE THRU 600V
·Self-amalgamating
·Good electrical properties
·Effective moisture seal
·Good conformability Dielectric Strength
RECOMMENDED USES：
For insulating of splices on solid dielectric cabletr 600V in conjunction with a jacketing tape.
STANDARDS INSTALLATION TECHNIQUES:
Tapes should be stretched during half-wrappings that the tape width is reduced to 3/4 of its origra width. Overlap at least two layers of PVC tape cuisde of the rubber tape to provide mechanical protecion.
